Material:
303, 304, 304L, 304H, 310, 316, 316L, 316Ti, 321, etc.

Standard: ASTM, ASME, AISI, BS, JIS, DIN, etc.

Testing: Tensile testing, impact testing, hardness testing,
    metallography analysis, spectrometer testing, etc.
 Hot Rolled Angle Bar
Width tolerance Unit:mm
AxB 25x25 30x30 40x40 50x50 60x60 65x65 70x70 75x75 80x80 90x90 100x100
Tolerance ±1.5 ±2.0 ±2.0 ±2.0 ±3.0 ±3.0 ±3.0 ±3.0 ±3.0 ±3.0 ±4.0
Thickness tolerance Size available* Unit:mm
3 4 5 6 7 8 9 10 11 12
25x25 ±0.5* ±0.5* ±0.5*              
30x30 ±0.5* ±0.5* ±0.5* ±0.5*            
40x40 ±0.6* ±0.6* ±0.6* ±0.6* ±0.6*          
50x50 ±0.6* ±0.6* ±0.6* ±0.6* ±0.6*          
60x60   ±0.6* ±0.6* ±0.6* ±0.6* ±0.6*        
65x65     ±0.6* ±0.6* ±0.7* ±0.7* ±0.7*      
70x70     ±0.7* ±0.7* ±0.7* ±0.7* ±0.7* ±0.7*    
75x75       ±0.7* ±0.7* ±0.7* ±0.7* ±0.7*    
80x80       ±0.7* ±0.7* ±0.7* ±0.7* ±0.7*    
90x90         ±0.7* ±0.7* ±0.7* ±0.8* ±0.8* ±0.8*
100x100         ±0.7* ±0.7* ±0.7* ±0.8* ±0.8* ±0.8*
 Hot Rolled Channel Bar
Tolerance: ±0.2mm(thickness)
      ±0.3mm(height)
      ±0.5mm(width)
Welded Channel Bar is also available.
Size available* Unit:mm
3 4 5 6 7 8 9 10 12
40x20 *                
50x25 *                
60x30 * * * *          
70x35 * * * *          
80x40 * * * *          
90x45 * * * *          
100x50 * * * * * * * *  
120x60     * * * *      
130x65     * * * * * *  
140x70       * * * * *  
150x75       * * * * * *
160x80       * * * * * *
180x90       * * * * * *
200x100       * * * * * *
 Hot Rolled Flat Bar
Size available* Unit:mm
 
20 25 30 32 35 38 40 45 50 60 65 70 75 80 90 100
3 * * * * * * * * * * *          
4 * * * * * * * * * * * * *      
5 * * * * * * * * * * * * * * * *
6 * * * * * * * * * * * * * * * *
8 * * * * * * * * * * * * * * * *
9 * * * * * * * * * * * * * * * *
10 * * * * * * * * * * * * * * * *
12 * * * * * * * * * * * * * * * *
14 * * * * * * * * * * * * * * * *
16 * * * * * * * * * * * * * * * *
19   * * * * * * * * * * * * * * *
20   * * * * * * * * * * * * * * *
Tolerance Unit:mm
Size(Width) Width Tolerance Thickness
below 13mm over 13mm
below 25mm ±0.7 ±0.5 ±4%
from 25mm to 50mm ±1.0 ±0.5 ±4%
from 50mm to 100mm ±2% ±0.5 ±4%
 Cold Draw Flat Bar
Size available* Unit:mm
 
20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130
3 * * * * * * *                                
4 * * * * * * * * * *                          
5 * * * * * * * * * * * * * * * * *            
6 * * * * * * * * * * * * * * * * *            
8 * * * * * * * * * * * * * * * * *            
10 * * * * * * * * * * * * * * * * *            
12 * * * * * * * * * * * * * * * * *            
14 * * * * * * * * * * * * * * * * *            
16 * * * * * * * * * * * * * * * * *            
18         * * * * * * * * * * * * * * * * * * *
20         * * * * * * * * * * * * * * * * * * *
22         * * * * * * * * * * * * * * * * * * *
24           * * * * * * * * * * * * * * * * * *
26             * *   * * * * * * * * * * * * * *
30             * *   * * * * * * * * * * * * * *
Tolerance Unit:mm
Size(Width) Width Tolerance
Thickness below 6.5mm Thickness over 6.5mm
below 25mm ±0.1 ±0.1
from 25mm to 50mm ±0.15 ±0.1
from 50mm to 75mm ±0.2 ±0.1
from 75mm to 130mm ±0.25 ±0.13

To view PDF file, you need Adobe Reader version 7.0 or higher. Click the icon to download the latest version.

Although we will keep updating our catalogues, there're always new products not shown on our catalogues. So please remember to contact us directly to get the latest information.
 
 
TEL:0086-411-39870222/39870220/39870299/82812887   FAX:0086-411-82821131
E-MAIL:INFO@MAXVALUE.NET  HTTP://WWW.MAXVALUE.NET